Medtronic Paradigm 522 Guide de l'utilisateur télécharger pdf (Page 48)

5 While the pump turns on, it will show one or more screens until

the

HOME screen appears.

If the HOME screen does not appear, do these steps:

a. Check that the battery is inserted correctly. If the battery has

been installed backwards, remove the battery and install it

properly.

b. If your pump still does not turn on or you get a FAILED BATT TEST alarm, remove and replace the

battery with a new one.

c. If the pump is still not on, call your local help line or representative.

6 Check to make sure the time and date are correct. If more than five minutes have passed since you

removed the battery, you will be prompted to check the time and date. Refer to the Setting the time

and date section in the Basic programming chapter for programming instructions.

7 Press ESC to view the STATUS screen, making sure no alarms are active. If an alarm is active, follow

the instructions on the screen.

Pump buttons

The buttons on the pump are used to navigate through the menus and screens, and to program the

features of the pump.

EXPRESS

BOLUS

button

ESC

button

ACT

button

DOWN

button

UP button

From the HOME

screen,

this is the

EASY BOLUS button

HOME screen

The basics 29

Chapter 3

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 261 262

Pas de commentaire

Medtronic Paradigm 522 Guide de l'utilisateur Page 48